Windows server 2012 on ASUS N550JV

Follow the instruction here in general.

Then download the following drivers from the ASUS support page.

For the Nvidia graphics card to work, install the V9.18.13.1193 version of the Nvidia driver under Windows 8, VGA. You may need a few reboot to finally get the driver working.

For Direct X to be fully functional, follow the instruction here to install missing .dlls.

For Xbox 360 controller: Use the Windows 7 driver available here. Indeed I can't get the controller in any steam games however. I use xb360ce as a workaround.

For the radio control driver, use ATK4001.

Bluetooth is not supported on Windows server 2012.


Comments

Post a Comment

Popular posts from this blog

Using PlayStation 1 Densha de Go controller on emulators

Image
Items needed Arduino Leonardo (or equivalent). Note that it has to have at least one 3.3V power output. A standard PlayStation 1 controller A Densha de Go controller 6 male-to-female jumper cables Procedure Initial Cabling Using the jumper cable, connect the typical PlayStation 1 controller with the Arduino Leonardo. PlayStation 1 controller pin numbers --------------------- \ 1 2 3 4 5 6 7 8 9 /  ------------------- Connection to Arduino Leonardo * PlayStation 1 controller pin 1 (DATA) --> Arduino Leonardo digital port 12  * PlayStation 1 controller pin 2 (CMD) --> Arduino Leonardo digital port 11  * PlayStation 1 controller pin 4 (GND) --> Arduino Leonardo port GND  * PlayStation 1 controller pin 5 (VCC) --> Arduino Leonardo port 3.3V  * PlayStation 1 controller pin 6 (ATT) --> Arduino Leonardo digital port 5  * PlayStation 1 controller pin 7 (CLK) --> Arduino Leonardo digital port 4 Set up Arduino IDE Install the IDE is available at  https://www.arduino.
Read more

Using PS1/PC Densha de Go! controller SLPH-00051/TCPP-20001/DGOC-44U on PS4/Switch Densha de Go!!

Image
Items needed A Densha de Go! controller (PS1 original version SLPH-00051, the one-handle version TCPP-20001, or the USB PC version DGOC-44U) A Titan Two A few micro USB cables A PlayStation 4 with controller/A Nintendo Switch with a USB controller A PlayStation 4/Nintendo Switch Densha de GO!! game [Required for SLPH-00051 and TCPP-20001 only]: Either Arduino Leonardo (or equivalent). Note that it has to have at least one 3.3V power output 6 male-to-female jumper cables or a  Mayflash SS/N64/PS2 Controller Adapter for PC USB  (which has issue setting P0 and P4 correctly if the player switches between these two states quickly) Adding a USB interface for the PS1 Densha de Go! controller Do this if you are using PS1 Densha de Go! controller. Arduino approach Cabling Using the jumper cable, connect the Densha de Go! controller with the Arduino Leonardo. PlayStation 1 controller pin numbers --------------------- \ 1 2 3 4 5 6 7 8 9 /  ------------------- Connection to Arduino Leonardo * Pla
Read more

Play octoshape stream on windows with VLC player

Install windows octoshape plugin at http://www.octoshape.com/files/octosetup.exe Install VLC player at http://www.videolan.org/vlc/download-windows.html . Use the installer so later octoshape can pick it as the preferred player. (Updated 12/26/2010: A dirty way to make sure windows associate all media files to vlc player is to explicitly set in vlc's Tool -> Preferences -> Interface -> Set up associations, select all file types. Then in Octoshape Settings (right click on the Octoshape system tray icon and select Settings), select use "System player") Create a bat file named stream.bat. In Windows XP, type in the bat file. "C:\Documents and Settings\ [user]\Application Data\Octoshape\Octoshape Streaming Services\OctoshapeClient.exe" -url:[octostream] In Windows Vista/7 "C:\Users\[user] \AppData\Roaming\Octoshape\Octoshape Streaming Services\OctoshapeClient.exe" -url:[octostream] Replace [user] with your current user name, [octostream] w
Read more